SIF - Clogged exhaust filter indicator

This device was developed for use on lubricated vacuum pumps and measures the increase in load loss in an oil separator filter.

FSC - Condensation separator filter

These prevent condensable fumes or liquids from the system from being taken in. The housing is transparent to visually check the level of the intercepted liquid, and the drainage valve on the bottom of the cap allows it to be expelled.

FMB - Antibacterial filters for medical vacuum

Recommended when the removal of microorganisms and/or any other types of contamination is necessary, helping to decontaminate the intake volume as well as protect the pump and the surrounding atmosphere.

FDS – Oil separator filter with cartridge

This series of filters has been designed to stop any particles of oil at the exhaust of the vacuum pumps.

FCT - Filters with transparent bowl

Mounted on the pump or compressor intake to protect them from dust or solids. The clear housing allows to quickly check the status of the filter cartridge.

FCM - Filters with metal bowl

Mounted at the pump or compressor intake to protect them from dust or solids. The housing is made of metal and a rapid opening system makes it easy to replace the filter cartridge.

FBO - Oil bath filters

Developed to allow vacuum pumps to operate even in very dusty environments. Filtration is provided by a special metal mesh cartridge inserted at the bottom of the filter, which also contains the oil that serves to trap the smallest dust particles.

FAS - Intake filter

FAS - Intake filter These filters have been developed specifically for use on the intake of side-channel blowers. Their special construction makes it easy to maintain and replace the filter cartridge.

ATG / AVA / AVB / AVC - Hose connections and shock mounts

ATG / AVA / AVB / AVC - Hose connections and shock mounts Necessary to attenuate the pump vibration and reduce the noise level.